M12000
Self-Recovery Winch- For heavy-duty winching needs, this
winch is a champion workhorse. Big torque, power and quick no-load retrieval
speed is 30 feet per minute. Its design is low profile, so it'll fit where you
want. And it's powered by the 4.6-hp Series WoundTM motor and our proven three-stage
planetary gear train. With 125 ft. of 3/8" wire rope, the WARN M12000 can solve
most any pulling problem.
M12000 SPECS:
Rated Line Pull: 12000
lbs. (5440 kgs.) single-line
Motor: 12V 4.6 hp,
24V 2.5 hp Series WoundTM
Remote Control: Remote
switch, 12' (3.7m) lead
Geartrain: 3-Stage
Planetary
Gear Ratio: 261:1
Lubrication: Aeroshell
# 17
Clutch (freespooling):
Rotating Ring Gear
Brake: Automatic Direct
Drive Cone
Drum Diameter/Length:
3.5"/8.2" (9cm/21cm)
Weight: 136lbs. (62kgs.)
Wire Rope: 125', 3/8"diameter
(38m, 9.5mm diam)
Fairlead: Roller Recommended
Battery: 650 CCA minimum
for winching
Battery Leads: 2 gauge,
72" (1.83m)
Finish: Argent Gray
Powder Coat
Nuts/Bolts: PN 39572
CE Winches: CE products
are designed to meet European Standards. CE winches include CE labels, manuals,
roller fairlead, safety hook and thimble.
Winch Dimensions:
24.37" L. x 8.45" D. x 11" H. (6.19mm L. x 214.63mm D. x 279mm H.)
Mounting Bolt Pattern:
10.0" x 4.5" (254mm x 114.3mm)
XtremeTerrain.com, LLC
1192 East Draper Parkway #302
Draper, UT 84020
Toll Free: 1-888-228-6024 Local: 801-649-4240
This entire site with its content is copyright protected. Jeep,
Cherokee, Grand Cherokee Laredo, Willys, CJ, TJ, and Wrangler are registered
trademarks of the DaimlerChrysler Corporation. All of the preceding trademarks
are used throughout this web site for identification purposes only. Xtremeterrain.com
is not affiliated with the DaimlerChrysler Corporation.